HarpSyncSource

Specifies the physical Harp clock input source.

Fields

Field & Value Description

Field & Value	Description
`Breakout = 0`	Specifies the Harp 3.5-mm audio jack connector on the side of the ONIX breakout board.
`ClockAdapter = 1`	Specifies SMA clock input 0 on the ONIX breakout board. In early access versions of the ONIX breakout board, Harp 3.5-mm audio jack connector was configured for output only, so a special adapter was needed to transmit the Harp clock synchronization signal to the breakout clock input zero.


          Breakout = 0

Specifies the Harp 3.5-mm audio jack connector on the side of the ONIX breakout board.


          ClockAdapter = 1

Specifies SMA clock input 0 on the ONIX breakout board.

In early access versions of the ONIX breakout board, Harp 3.5-mm audio jack connector was configured for output only, so a special adapter was needed to transmit the Harp clock synchronization signal to the breakout clock input zero.

Table of Contents

HarpSyncSource

Fields