.. _partslist:

*************************************************
Parts list
*************************************************

You will need some parts and tools designed specifically for the shuttleDrive:

Parts
################################################
* `1  x 3d printed drive body <https://open-ephys.org/drive-implant/drive-parts>`_
* `16 x 3d printed drive shuttles <https://open-ephys.org/drive-implant/drive-parts>`_
* `1m of Polymicro (polyimide-coated quartz) shuttle tubes <https://open-ephys.org/drive-implant/drive-parts>`_

* `Polyimide tubes to make guide tube arrays <https://open-ephys.org/drive-implant/guide-tube-array-tubes>`_
* `16 x Custom drive screws (reusable) <https://open-ephys.org/drive-implant/drive-screwdriver-6se4e>`_
* `Electrode interface boards (EIBs, reusable) <https://open-ephys.org/drive-implant/64-channel-eib-lyfw2>`_
* `Gold pins <https://open-ephys.org/drive-implant/eib-accessories>`_

Tools
################################################
* `Assembly jig <https://open-ephys.org/drive-implant/drive-assembly-jig>`_
* `Custom screwdriver <https://open-ephys.org/drive-implant/drive-screwdriver>`_

(Refer to the full list below for additional tools such as forceps etc.)

Full parts list
################################################

In addition, you will need some general consumables and equipment. Use this list to make sure your assembly station has everything you need.

.. raw:: html

  <center><iframe width="800" height="1200" scrolling='yes' src="https://docs.google.com/spreadsheets/d/e/2PACX-1vS7rOU34zTBOUExG9Go0FgDI0clgiVmCHn0TywuopWubjpITQT12B-zE60vvLS5sBTwPbHjt8g6dtxB/pubhtml"></iframe></center>