ConfigureBno055

sink Operator

Configures a Bosch Bno055 9-axis inertial measurement unit (IMU).

This configuration operator can be linked to a data IO operator, such as Bno055Data, using a shared DeviceName.

ConfigureBno055 Workflow

Inputs & Outputs

Configures a Bosch Bno055 9-axis IMU device.

This will schedule configuration actions to be applied by a StartAcquisition instance prior to data acquisition.

A sequence of ContextTask instances that holds configuration actions.

The original sequence modified by adding additional configuration actions required to configure a Bno055 device.

Property	Type	Description
`Enable`	bool	Gets or sets the device enable state. If set to true, a Bno055Data instance that is linked to this configuration will produce data. If set to false, it will not produce data.
`DeviceName`	string	Gets or sets a unique device name. The device name provides a unique, human-readable identifier that is used to link software elements for configuration, control, and data streaming to hardware. For instance, it can be used to link configuration operators to data IO operators within a workflow. This value is usually not set manually, but is assigned in a MultiDeviceFactory to correspond to a fixed address with a piece of hardware such as a headstage. This address is used for software communication.
`DeviceAddress`	uint	Gets or sets the device address. This is a fully-qualified numerical hardware address of a device within the device table produced by an Open Neuro Interface (ONI) compliant acquisition system. This value is usually not set manually, but is assigned in a MultiDeviceFactory to correspond to a fixed address with a piece of hardware such as a headstage. This address is used for hardware communication.
`DeviceType`	Type	Gets or sets the device identity. This type provides a device identity to each device within the device table produced by an Open Neuro Interface (ONI) compliant acquisition system.