Table of Contents
TIP

This is a device configuration operator. Aggregate configuration operators are recommended in lieu of device configuration operators for interfacing with Open Ephys Onix hardware.

ConfigureRhd2164

sink Operator

Configures an Intan Rhd2164 bioamplifier chip.

This configuration operator can be linked to a data IO operator, such as Rhd2164Data, using a shared DeviceName.

ConfigureRhd2164 Workflow

Inputs & Outputs

Configures a Rhd2164 device.

This will schedule configuration actions to be applied by a StartAcquisition instance prior to data acquisition.

A sequence of ContextTask instances that holds configuration actions.

 right-arrow
representation of a sink operator
right-arrow

The original sequence modified by adding additional configuration actions required to configure a Rhd2164 device.

Properties

Property Type Description
AnalogHighCutoff Rhd2164AnalogHighCutoff

Gets or sets the high cutoff frequency of the analog (pre-ADC) bandpass filter.

High20000Hz = 0
High15000Hz = 1
High10000Hz = 2
High7500Hz = 3
High5000Hz = 4
High3000Hz = 5
High2500Hz = 6
High2000Hz = 7
High1500Hz = 8
High1000Hz = 9
High750Hz = 10
High500Hz = 11
High300Hz = 12
High250Hz = 13
High200Hz = 14
High150Hz = 15
High100Hz = 16
AnalogLowCutoff Rhd2164AnalogLowCutoff

Gets or sets the low cutoff frequency of the analog (pre-ADC) bandpass filter.

Low500Hz = 0
Low300Hz = 1
Low250Hz = 2
Low200Hz = 3
Low150Hz = 4
Low100Hz = 5
Low75Hz = 6
Low50Hz = 7
Low30Hz = 8
Low25Hz = 9
Low20Hz = 10
Low15Hz = 11
Low10Hz = 12
Low7500mHz = 13
Low5000mHz = 14
Low3000mHz = 15
Low2500mHz = 16
Low2000mHz = 17
Low1500mHz = 18
Low1000mHz = 19
Low750mHz = 20
Low500mHz = 21
Low300mHz = 22
Low250mHz = 23
Low100mHz = 24
DspCutoff Rhd2164DspCutoff

Gets or sets the cutoff frequency for the digital (post-ADC) high-pass filter used for amplifier offset removal.

Differential = 0
Dsp3309Hz = 1
Dsp1374Hz = 2
Dsp638Hz = 3
Dsp308Hz = 4
Dsp152Hz = 5
Dsp75Hz = 6
Dsp37Hz = 7
Dsp19Hz = 8
Dsp9336mHz = 9
Dsp4665mHz = 10
Dsp2332mHz = 11
Dsp1166mHz = 12
Dsp583mHz = 13
Dsp291mHz = 14
Dsp146mHz = 15
Off = 16
Enable bool

Gets or sets the device enable state.

If set to true, a Rhd2164Data instance that is linked to this configuration will produce data. If set to false, it will not produce data.
DeviceName string

Gets or sets a unique device name.

The device name provides a unique, human-readable identifier that is used to link software elements for configuration, control, and data streaming to hardware. For instance, it can be used to link configuration operators to data IO operators within a workflow. This value is usually not set manually, but is assigned in a MultiDeviceFactory to correspond to a fixed address with a piece of hardware such as a headstage. This address is used for software communication.
DeviceAddress uint

Gets or sets the device address.

This is a fully-qualified numerical hardware address of a device within the device table produced by an Open Neuro Interface (ONI) compliant acquisition system. This value is usually not set manually, but is assigned in a MultiDeviceFactory to correspond to a fixed address with a piece of hardware such as a headstage. This address is used for hardware communication.
DeviceType Type

Gets or sets the device identity.

This type provides a device identity to each device within the device table produced by an Open Neuro Interface (ONI) compliant acquisition system.
Edit this page