Hardware Connections#
Gather Required Materials#
The required materials include:
Coaxial SMA plug ↔ U.FL plug tether
USB3.0 Micro Type B plug ↔ Type A plug cable
Miniscope-DAQ
UCLA Miniscope v4
PC with USB3.0 & Windows 7 or later
Connect Hardware#
Disconnect any previously connected hardware from Miniscope-DAQ and UCLA Miniscope v4.
Connect only the following hardware for this guide:
Connect Miniscope-DAQ to the UCLA Miniscope v4 using the provided coaxial SMA plug ↔ U.FL plug tether:
Connect Miniscope-DAQ to your computer using the provided USB3.0 Micro Type B plug ↔ USB3.0 Type A plug cable:
Confirm that all three indicators on the miniscope-DAQ are illuminated before proceeding from this step as indicated in the above photo.